StudLogoOrientation
Sample Distribution Charts
Color Distribution
Material Distribution
Origin Distribution
| Photo | Generation | Molds | BottomStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | PipStyle | StudRecessStyle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
05 - Tubeless - Logo inside | 3 | None | Left To Right | Blockletters | Mixed | None | None | None | None | None | Wide Straight 'O' | Centered Medium Bottom Edge | Large (3mm) |
 |
11 - Tubeless - No logo inside - corner pip | 3 | None | None | None | Across | None | None | None | None | None | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | Large sloped (3mm) |
 |
13 - Tubeless - No logo inside - other pips | 1 | None | None | None | None | None | Left (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Stud | Large (3mm) |
| 19 - Other parts - logo on studs | 12 | None | Left To Right | Dogbone | None | None | None | None | None | None | Narrow Straight 'O' | Bottom | None | |
| 21 - Old logo - 3mm stud recess - corner-pip | 6 | Tubes Without Cross-support | None | None | None | None | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | Large (3mm) | |
| 22 - Old logo - 3mm stud recess - other pips | 1 | Tubes With Cross-support | None | None | None | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Stud | Large (3mm) | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 7 | Tubes Without Cross-support | None | None | None | None | Right (Top To Bottom) | Typed | None | Normal | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | Medium (2,3-2,5mm) | |
 |
25 - Old logo - smaller stud recess - centered pip - no mold-id | 1 | Tubes Without Cross-support | None | None | None | None | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Round 'O' | Centered Side Surface | Small (2-2,2mm) |
| 31 - Old logo - 1x2 with mold identifiers | 5 | None | None | None | None | Center | Center (Top To Bottom) | Typed | None | None | Wide Round 'O' | Single Cornered Narrow Bottom Edge | Small (2-2,2mm) | |
| 32 - Old logo - 2x2 with mold identifiers | 13 | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | Left (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Single Cornered Narrow Bottom Edge | Small (2-2,2mm) | |
 |
35 - Old logo - 2x2r - with mold identifiers | 1 | None | None | None | None | Right (Circumferential) | Center (Circumferencial) | Typed | None | None | Wide Straight 'O' | Centered Narrow Bottom Edge | Small (2-2,2mm) |
| 90 - 90-Temp 10x20 | 1 | None | None | None | Spotted | None | Top right corner (Left To Right) | Typed | None | None | Modern | Top Side Surface | Large (3mm) |
05 - Tubeless - Logo inside (1955-1956)
| Photo | CatId | Mold | Members | PipStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|
 |
05f | Small blockletter - With stud-logo | 2 / 9 | Centered Medium Bottom Edge | Large (3mm) | |
 |
05g | Small blockletter - With stud logo | 1 / 9 | Centered Wide Bottom Edge | None | |
 |
05h | Small blockletter - No slotted bricks | 2 / 9 | Centered Wide Bottom Edge | None |
11 - Tubeless - No logo inside - corner pip (1956-1957)
| Photo | CatId | Mold | Members | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
11c | Unnumbered - sloped stud recesses | 3 / 22 | Across | None | None | Large sloped (3mm) | |
 |
11m | 2x2 Normal stud recesses | 20 / 28 | None | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11t | 1x2 Sloped stud-recesses sideways numbers | 16 / 28 | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) |
13 - Tubeless - No logo inside - other pips (1956-1957)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
13a | Pip on stud | 1 / 11 |
19 - Other parts - logo on studs (1958-1969)
| Photo | CatId | Mold | Members | PipStyle | InsideLogoOrientation | InsideLogoStyle | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
19f | Garage Floor Plate with stud logo - no mold id | 2 / 2 | Bottom | Left To Right | Dogbone | None | None | None | Narrow Straight 'O' | None | |
 |
19g | Garage Floor Plate with stud logo - mold "2" | 1 / 1 | None | Left To Right | Dogbone | Center | None | None | Narrow Straight 'O' | None | |
 |
19h | Garage Floor Plate with stud logo - mold "C" | 1 / 1 | Bottom | Left To Right | Dogbone | Center | None | None | Narrow Straight 'O' | None | |
 |
19i | Garage Floor Plate with stud logo - mold "D" | 1 / 1 | Bottom | Left To Right | Dogbone | Center | None | None | Modern | None | |
 |
19j | Garage Floor Plate with stud logo - mold "E" | 1 / 1 | Bottom | Left To Right | Dogbone | Center | None | None | Modern | None | |
 |
19k | Garage Floor Plate with stud logo - mold "F" | 1 / 1 | Bottom | Left To Right | Dogbone | Center | None | None | Modern | None | |
 |
19l | Garage Floor Plate with stud recess - smooth bottom surface | 1 / 1 | Bottom | Left To Right | Dogbone | None | None | None | Modern | Medium (2,3-2,5mm) | |
 |
19m | Garage Floor Plate with stud recess - small circles on bottom surface | 1 / 1 | Bottom | Left To Right | Dogbone | None | None | None | Modern | Medium (2,3-2,5mm) | |
 |
19n | Garage Door Frame with studs - wide straight 'O' | 2 / 2 | Centered Narrow Bottom Edge | None | None | None | Center (Top To Bottom) | Typed | Wide Straight 'O' | None | |
 |
19o | Garage Door Frame with studs - tall wide straight 'O' | 2 / 2 | Centered Narrow Bottom Edge | None | None | None | None | None | Wide Straight 'O' | None | |
 |
19p | Garage Door Frame with studs - narrow straight 'O' - partly sloped underside | 1 / 1 | Centered Narrow Bottom Edge | None | None | None | None | None | Narrow Straight 'O' | None | |
 |
19q | Garage Door Frame with studs - narrow straight 'O' - fully sloped underside | 1 / 1 | Centered Narrow Bottom Edge | None | None | None | None | None | Narrow Straight 'O' | None |
21 - Old logo - 3mm stud recess - corner-pip (1958-1959)
| Photo | CatId | Mold | Members | BottomStyle | MoldPositionLayout | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|
| 21aa | 4x4 Cornered | 4 / 8 | Tubes With Cross-support | Right (Top To Bottom) | Top+Bottom (centered) | Normal | ||
| 21ai | 1x2 - Mold #3 Stud logo across - without relation to gen 23 | 40 / 48 | None | Center (Top To Bottom) | None | None | ||
| 21aj | 1x2 - Mold #4 Stud logo across - with relation to gen 23 | 35 / 48 | None | Center (Top To Bottom) | None | None | 23v (Matching patterns, but with different stud-sizes) | |
| 21s | 2x2 - Pos. left of tube | 4 / 6 | Tubes Without Cross-support | Left (Bottom To Top) | Top+Bottom (centered) | Normal | ||
| 21t | 2x2 Pip top/bottom - rounded tube edge | 16 / 22 | Tubes Without Cross-support | Right (Top To Bottom) | Top+Bottom (centered) | Normal | ||
| 21u | 2x2 pip right - horizontal logo | 11 / 28 | Tubes Without Cross-support | Right (Top To Bottom) | Top+Bottom (centered) | Normal |
22 - Old logo - 3mm stud recess - other pips (1958-1959)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 22a | 4x4 Cornered | 1 / 2 |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | PatPendStyle | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 23ag | 1x2 - Mold #8 Stud logo across - related to 21ai | 2 / 4 | None | Across | Center (Top To Bottom) | Typed | None | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23p | 2x2 - vertial stud-logo | 26 / 28 | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Normal | Wide Straight 'O' | Medium (2,3-2,5mm) | ||
| 23s | 2x2 and 2x3 - without pat.pend/mold-id | 7 / 8 | Tubes Without Cross-support | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23v | 1x2 - Mold #3 Stud logo across - with relation to gen 21 | 30 / 48 | None | None | Center (Top To Bottom) | Typed | None | Wide Straight 'O' | Small (2-2,2mm) | 21aj (Matching patterns, but with different stud-sizes) | |
| 23w | 1x2 - Mold #4 Stud logo across - without relation to gen 21 | 22 / 48 | None | None | Center (Top To Bottom) | Typed | None | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23x | 1x2 - Mold #5 Stud logo across - without relation to gen 21 #2 | 2 / 3 | None | None | Center (Top To Bottom) | Typed | None | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23z | 1x2 - Mold #6 Stud logo across - unnumbered | 2 / 2 | None | None | None | None | Normal | Wide Round 'O' | Small (2-2,2mm) |
25 - Old logo - smaller stud recess - centered pip - no mold-id (1960-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 25a | 2x4 - horizontal stud logo | 22 / 22 |
31 - Old logo - 1x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 31a | 1x2 - A-mold | 25 / 48 | ||
| 31b | 1x2 - B-mold | 2 / 5 | ||
| 31d1 | 1x2 - D-mold | 20 / 52 | ||
| 31e1 | 1x2 - E-mold | 24 / 52 | 31e2 (Rotated 180 deg.) | |
| 31e2 | 1x2 - E-mold rotated | 2 / 2 | 31e1 (Rotated 180 deg.) |
32 - Old logo - 2x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | PatPendLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|
| 32a | 2x2 - A-mold | 30 / 32 | Right (Top To Bottom) | Left (Top To Bottom) | Top+Bottom (centered) | Wide Straight 'O' | ||
| 32b | 2x2 - B-mold | 4 / 32 | Left (Bottom To Top) | Right (Bottom To Top)+Bottom | Top+Bottom/Top+Right | Wide Straight 'O' | ||
| 32c1 | 2x2 - C-mold 1 - Small mold-id left | 7 / 32 | Left (Top To Bottom) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Straight 'O' | ||
| 32c2 | 2x2 - C-mold 2 - Small mold-id right | 4 / 28 | Right (Top To Bottom) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Straight 'O' | ||
| 32d1 | 2x2 - D-mold 1 - Pip right | 10 / 32 | Left (Bottom To Top) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32d2 | 2x2 - D-mold 2 - Pip left | 2 / 2 | Left (Bottom To Top) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32e1 | 2x2 - E-mold 1 - Mold-id top to bottom | 3 / 34 | Left (Top To Bottom) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32e2 | 2x2 - E-mold 2 - Mold-id bottom to top | 1 / 28 | Left (Bottom To Top) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32f | 2x2 - F-mold | 1 / 2 | Right (Top To Bottom) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32j | 2x2 - J-mold | 21 / 32 | Right (Bottom To Top) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32k | 2x2 - K-mold | 7 / 34 | Right (Bottom To Top) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32l | 2x2 - L-mold | 21 / 36 | Right (Bottom To Top) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | 32l2 (Matching pattern - rotated 180 deg) | |
| 32l2 | 2x2 - L-mold 2 - Pip right | 1 / 2 | Right (Bottom To Top) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' | 32l (Matching pattern - rotated 180 deg) |
35 - Old logo - 2x2r - with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
35c | 2x2 Quarter Circle C prefix | 1 / 3 |
90 - 90-Temp 10x20 (1962-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
90t | 10x10 Normal logo - no X-shape - no mold id | 3 / 3 |
| Generations | Molds | MoldMembers |
|---|---|---|
| 12 | 54 | 473 |
Color
Angle
Motive
